Velleman-projects K8041 Assembly instructions Manual de usuario descargar pdf (Pagina 11)

Optional housing

17. Mounting into the optional housing

This fan timer exactly fits into the box type G311 from Velleman

Components. Follow the assembly instructions below :

1. Drilling the holes :

— Mark the centre of the holes to be drilled on the front of the

bottom enclosure. (Fig. 1.0)

— You can drill the left hole with a Ø 7mm drill bit and the right

hole with a Ø 15mm bit.

Ø 15

Ø 7

FIG. 1.0

— Mark the centre of hole to be drilled in the lid for the LED clip Fig. 2.0

— Drill the hole with a Ø 4,5mm drill.

Ø 4,5mm

FIG. 2.0

F MAKE SURE THE EDGES OF THE HOLES ARE

COMPLETELY SMOOTH.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Velleman-projects K8041 Assembly instructions Manual de usuario Pagina 11